The MT-900 is a multi-axis mill-turn center designed to consolidate turning, milling, drilling, tapping, and multi-face machining into a single setup. With X/Y/Z/W linear axes combined with A, B, C1, and C2 rotary axes, the MT-900 offers flexible machining capability for a wide range of medium-complexity parts. Its configuration is similar to the MT-210, but with a longer machining length to accommodate extended workpieces and larger process requirements.
The machine features a 3,000-rpm main spindle (A2-5) with a 6-inch chuck, suitable for general turning applications. The built-in BBT-30 milling spindle reaches up to 24,000 rpm, supporting efficient light-to-medium milling operations. The B-axis provides ±105° of rotation with 1,080 N-m of torque, enabling multi-angle machining and improved process flexibility. Dual C-axes with 0.001° indexing capability support synchronized operations between the main and sub-spindle.
With rapid traverse speeds up to 30 m/min and a 24-tool magazine, the MT-900 enhances production efficiency in multi-process workflows. The left and right servo turrets (11 stations each) further expand tooling capacity and enable smooth transitions between cutting operations.
The MT-900 is well-suited for general industrial components, automotive parts, mechanical assemblies, and medium-complexity turned-milled work that benefits from process consolidation or reduced handling. By allowing multiple operations to be completed in one setup, the MT-900 improves throughput, consistency, and overall workflow efficiency—especially for users requiring slightly longer machining capability compared to the MT-210.
A: The MT-900 combines twin main/sub-spindles, B-axis milling, twin servo turrets, and a 24-tool magazine — enabling front-face turning, rear-face turning (sub-spindle), multi-axis milling, drilling, and tapping all in one setup. This eliminates workpiece transfers and re-fixturing between separate turning and milling machines.
A: The MT-900 uses a BBT-30 tooling interface with a built-in milling spindle reaching 24,000 rpm — providing high cutting speeds for aluminum, titanium, and steel milling operations integrated with the turning process.
A: The MT-900 is designed for general industrial components, automotive parts (gearbox shafts, connecting components), and mechanical assemblies requiring complete machining. Its combination of twin spindles and high-speed milling also makes it effective for precision sub-contract manufacturing environments where machine footprint reduction and setup elimination are priorities.
The MT-900 Multi-Axis Mill-Turn Machining Center is designed to consolidate turning, milling, drilling, and tapping — with both front and rear-face operations — into a single machine and single setup. Combining twin main and sub-spindles (3,000 rpm belt-drive, A2-5), a high-speed BBT-30 milling spindle (24,000 rpm built-in), and a B-axis with ±105° rotation and 1,080 N-m maximum torque, the MT-900 provides the multi-process capability for complete industrial part machining.
The MT-900 features twin servo turrets (left and right) for simultaneous cutting operations, dramatically reducing cycle times for components requiring extensive turning. A 24-tool magazine with Ø80×150mm maximum tool dimensions enables extended unmanned production runs. C1 and C2 axes (360°, 3,000 rpm) on both main and sub-spindle support full C-axis turning, contouring, and synchronized operations. Maximum machining capacity: Φ300mm diameter, 922mm length, within Φ500mm swing.
The B-axis (±105°, 4,000 rpm, 1,080 N-m, ±0.1′ repeatability) provides the torque and precision needed for heavy milling operations on large structural features. Rapid traverse speeds of 24/30/24/24 m/min (X/Y/Z/W) minimize non-cutting time. The MT-900 is well-suited for general industrial components, automotive parts, and mechanical assemblies where complete machining in one setup delivers significant quality and productivity advantages. Manufactured in Taichung, Taiwan by Ingenious Machinery.
| ITEM | UNIT | MT-900 |
| Capacity | ||
| Swing over bed | mm | Φ500 |
| Max. machiing diameter | mm | Φ300 |
| Max. machining length | mm | 922 |
| Travels | ||
| X/Y/Z/W-axis | mm | ±150 / 420 / 900 / 968 |
| B / C1/C2/a-axis | ° | ±105° / 360°/ 360° / 360° |
| Main-Spindle and Sub-Spindle | ||
| Speed | rpm | 3,000 (belt-drive) |
| Spindle nose | A2-5 | |
| Spindle bore dia. / Draw bar dia. | mm | Φ56 / Φ45 |
| Front bearing inner dia. | mm | Φ80 |
| Chuck size | inch | 6″ |
| Milling-spindle | ||
| Tool shank type | BBT-30 | |
| Max. spindle speed | rpm | 24,000 (Built-in) |
| Max. spindle torque | Nm | 7.8 |
| A-axis index | arcmin | 1 |
| B-axis | ||
| Rotary angle | ° | ±I05° |
| Max. speed | rpm | 4,000 |
| Max. torque | Nm | 1,080 |
| Repeatability accuracy | arcmin | ±0.1 |
| B-axis index | arcmin | 1 |
| C-axis (C1 & C2) | ||
| Rotary angle | ° | 360 |
| Max. speed | rpm | 3,000 |
| Max. torque | Nm | 49 |
| C-axis index | arcmin | 1 |
| Feedrate | ||
| X/Y/Z/W-axis rapid traverse | m/min | 24 / 30 / 24 / 24 |
| Tool magazine | ||
| Tool capacity | pcs | 24 |
| Max. tool diameter / length | mm | Ø80 x 150 |
| Max. tool weight | kg | 3 |
| Tool change time | sec | 4.8 |
| Turret (Left / Right) | ||
| Type | Servo | |
| Tool capacity | pcs | 11 |
| Squre tool shank | mm | 20 x 20 |
| Boring bar shank | mm | Ø32 |
| Motor | ||
| Main-spindle | kw | 7 |
| Sub-spindle | kw | 3 |
| Milling-spindle | kw | 10 |
| X/Y/Z/B/W-axis | kw | 1 x 5pcs |
| Tool magazine | kw | 1 |
| Turret (Left / Right) | kw | 0.75 x 2pcs |
| Hydraulic oil pump | kw | 0.75 |
| Coolant pump | kw | 0.85 |
| Power | ||
| Requirement | KVA | 380-415 / 220V 30KVA |
| Machine size | ||
| L x W X H | cm | 336 x 228 x 229 |
| Net weight | kgs | 5,000 |
| Pacing sizse | ||
| L x W X H | cm | 394 x 230 x 254 |
| Gross weight | kgs | 5,284 |
If you’re an agent or owner of our machines, request access so you can access manuals and error codes here
