| ITEM | UNIT | ML-600S | ML-600Y | ML-600T | ML-600TY | ||
| Standard | C axis | Standard | C axis | ||||
| Capacity | |||||||
| Swing over bed | mm | Φ600 | Φ600 | Φ600 | Φ600 | ||
| Swing over saddle | mm | Φ450 | Φ450 | Φ450 | Φ450 | ||
| Maximum machining diameter | mm | Φ420 | Φ340 | BMT65: 380; VDI40: 285 | Φ420 | Φ340 | BMT65: 380; VDI40: 285 |
| Maximum machining length | mm | STD: 560 (8″); OPT: 540 (10″) | BMT65 STD: 480 (8″); OPT: 470 (10″) VDI40 STD: 520 (8″); OPT: 510 (10″) |
STD: 475 (8″); OPT: 465 (10″) |
BMT65 STD: 450 (8″); OPT: 440 (10″) VDI40 STD: 475 (8″); OPT: 465 (10″) |
BMT65 STD: 450 (8″); OPT: 440 (10″) VDI40 STD: 475 (8″); OPT: 465 (10″) |
|
| Slant angle of bed | 30° | 60° | 30° | 60° | |||
| Travel Range | |||||||
| X-axis | mm | 230 (210+20) | 225 (170+55) | BMT65: 206 (190+16); VDI40: 206 (142.5+63.5) | 230 (210+20) | 218 (170+48) | BMT65: 206 (190+16);VDI 40: 206 (142.5+63.5) |
| Y-axis | mm | – | ±50 | – | ±50 | ||
| Z-axis | mm | 600 (8″); 590 (10″) | BMT65: 525; VDI40: 565 | 600 | BMT65: 450; VDI40: 495 | ||
| C-axis | ° | – | 360° (0.001°) | 360° (0.001°) | – | 360° (0.001°) | 360° (0.001°) |
| W-axis | mm | – | – | 450 | 450 | ||
| Spindle | |||||||
| Spindle speeds | rpm | STD: 50~4,500 (8″); OPT: 50~3,500 (10″) |
STD: 50~4,500 (8″); OPT: 50~3,500 (10″) |
Main spindle STD: 50~4,500 (8″); OPT: 50~3,500 (10″) |
Sub-spindle 50~6,000 (6″) |
||
| Spindle nose | STD: A2-6; OPT: A2-8 | STD: A2-6; OPT: A2-8, Built-in Spindle A2-6 | STD: A2-6; OPT: A2-8, Built-in Spindle A2-6 | STD: A2-5 | |||
| Spindle bore diameter | mm | STD: Φ62 (A2-6); OPT: Φ86 (A2-8) | STD: Φ62 (A2-6); OPT: Φ86 (A2-8) | STD: Φ62 (A2-6); OPT: Φ86 (A2-8) | Φ56 | ||
| Front bearing inner diameter | mm | STD: Φ100 (A2-6); OPT: Φ120 (A2-8) | STD: Φ100 (A2-6); OPT: Φ120 (A2-8) | STD: Φ100 (A2-6); OPT: Φ120 (A2-8) | Φ80 | ||
| Draw bar diameter | mm | STD: Φ52; OPT: Φ75 | STD: Φ52; OPT: Φ75 | STD: Φ52; OPT: Φ75 | Φ45 | ||
| Chuck | |||||||
| Chuck diameter | inch | STD: 8″; OPT: 10″ | STD: 8″; OPT: 10″ | STD: 8″+6″ (W); OPT: 10″+6″ (W) | STD: 8″+6″ (W); OPT: 10″+6″ (W) | ||
| Turret | |||||||
| Type | STD: Hydraulic OPT: Servo |
Live-tooling (VDI40) | Live-tooling | STD: Hydraulic OPT: Servo |
Live-tooling | Live-tooling | |
| Stations | pcs | STD: 10; OPT: 12 | STD: 12 | STD: 12 | STD: 10; OPT: 12 | STD: 12 | STD: 12 |
| Model | STD: LS-240 OPT: LS-240SV |
LS-200SP | LS-200DTR | STD: LS-240 OPT: LS-240SV |
LS-200DTR | LS-200DTR | |
| Square tool shank | mm | 25 x 25 | 25 x 25 | 25 x 25 | 25 x 25 | ||
| Boring bar shank diameter | mm | Φ40 | Φ40 | Φ40 | Φ40 | ||
| Indexing time (0~180°) | sec | LS-240: 1.4 (10T), 1.5 (12T); LS-240SV: 0.7(12T) |
1.2 | 1.4 | LS-240: 1.4 (10T), 1.5 (12T); LS-240SV: 0.7(12T) |
1.4 | 1.4 |
| Live Tool | |||||||
| Spindle Speeds | rpm | – | 50~4,000 | 50~4,000 | – | 50~4,000 | 50~4,000 |
| Feed Rate | |||||||
| Rapid Traverse | m/min | X: 30, Z:30 | X: 30, Z: 30, Y: 24, C: 200rpm | X: 30, Z:30, W:24, C: 200rpm | X: 30, Z: 30, Y: 24, W: 24, C: 200rpm | ||
| Tailstock | |||||||
| Type | Automatic | Automatic | – | – | |||
| Quill diameter | mm | Φ85 | Φ85 | – | – | ||
| Quill bore taper | MT5 | MT5 | – | – | |||
| Quill travel | mm | 120 | 120 | – | – | ||
| Tailstock travel | mm | 500 | 450 | – | – | ||
| Motors | |||||||
| Main-spindle | kw | STD: α30ip (15/18.5); OPT: α22ip (11/15) | STD: α30ip (15/18.5); OPT: α22ip (11/15) | STD: α30ip (15/18.5); OPT: α22ip (11/15) | STD: α30ip (15/18.5); OPT: α22ip (11/15) | ||
| Sub-spindle | kw | – | – | α6 (5.5/7.5) | α6 (5.5/7.5) | ||
| Live-tool | kw | – | α3/10000 (3.7/5.5) | α3/10000 (3.7/5.5) | – | α3/10000 (3.7/5.5) | α3/10000 (3.7/5.5) |
| Axis servo motor | kw | X/Z – α12 (3.0) | X/Y/Z – α12 (3.0) | X/Z/W – α12 (3.0) | X/Y/Z/W – α12 (3.0) | ||
| Hydraulic oil pump | kw | 1.5 | 1.5 | 1.5 | 1.5 | ||
| Chip conveyor | kw | 0.2 | 0.2 | 0.2 | 0.2 | ||
| Coolant pump | kw | 0.8 | 0.8 | 0.8 | 0.8 | ||
| Accuracy | |||||||
| Positioning | mm | ±0.004 | ±0.004; Y: ±0.003 | ±0.005 | X/Z: ±0.005; Y: ±0.003 | ||
| Repeatability | mm | ±0.003 | ±0.003; Y: ±0.003 | ±0.004 | X/Z: ±0.004; Y: ±0.003 | ||
| Power | |||||||
| Requirements | KVA | 380-415/220V 26 KVA | 380-415/220V 30KVA | 380-415/220V 30KVA | 380-415/220V 30KVA | ||
| Machine size | |||||||
| Height | cm | 185 | 228 | 186 | 228 | ||
| Floor space (WxD) | cm | 401 x 214 | 441 x 233 | 441 x 214 | 441 x 233 | ||
| Packing (w/conveyor) | cm | 389 x 212 x 212 | 402 x 229 x 255 | 402 x 229 x 212 | 402 x 229 x 253 | ||
| Net weight (w/conveyor) | kg | 5,430 | 6,100 | 5,990 | 6,200 | ||
| Gross weight (w/conveyor) | kg | 5,730 | 6,370 | 6,328 | 6,700 | ||
If you’re an agent or owner of our machines, request access so you can access manuals and error codes here
